SAL ENVIRO C
SAL Enviro C can be used for all applications with ambient temperatures of 0°C to +40°C. The reliable operating principle is based on an electrochemical reaction. The lubrication period is determined by colour coded activator screws. Depending on your application requirement, you may choose to discharge 120 cm3 in a period of 1, 3, 6 or 12 months. The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication point. SAL Enviro C is fully dust and water proof and can withstand impacts and accident knocks.
Applications
SAL Enviro C is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc. operated at ambient temperatures that reach from 0 up to +40 °C. Typical applications can be found in mining, steel, automotive and mechanical engineering.
Product Characteristics
- Simple activation with activator screw
- Activation: 1, 3, 6 or 12 months
- Quick installation / tamper proof
- Simple exchange / no special tools required
- Inexpensive automatic single-point lubrication
- Metal housing
- Robust housing for use in harsh environments
- Ex-proof certification
- Mining approval
- Safe and reliable lubrication in explosive areas
- Less exposure to safety hazards increases workplace safety
- Suitable for underground use
Technical Information
| Drive | Electrochemical Reaction |
| Housing | Metal |
| Discharge Period | 1, 3, 6 or 12 months |
| Lubricant Volume | 120 cm3 |
| Operating Temperature | 0°C to +40°C |
| Pressure Build-Up | Max 4 Bar |
| Lubricants | Grease up to NLGI 2 / Oil |
| Max. Pipe Length | 1.00 m |
| CE | √ |
| EX | √ |
Tel: +27 12 547 1053 | Fax: +27 86 5011 728
251 Apaché Avenue | Cynthia Vale | Doornpoort | Pretoria | 0186