SAL ELITE
The SAL Elite operates fully automatically, independent of temperature and very precisely. The system consists of an electronic drive unit, a lubricant canister (LC) with a lubricant volume of 60, 120, 250 cm3 and a battery pack. The desired discharge period and LC size can easily be selected with the push button and are immediately visible in the display. The current operating status is indicated on the display and via the all-around LED signal lights (red/green), which are visible from a distance.
Applications
SAL Elite 60, 120 and 250 is used for single-point lubrication of roller-and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, and chains. This lubrication system is ideal for applications that require precise lubricant metering. It is a preferred system for electric motors with very specific relubrication amounts. SAL Elite is protected against dust and water jets when the individual parts are assembled correctly.
Product Characteristics
-
- LCD display with push button shows discharge period, LC size and operating status• LCD display with push button shows discharge period, LC size and operating status
- Settings 1, 2, 3, …12 months & LC size
-
-
- Simple and self-explanatory operation
- Precise settings, based on manufacturer recommendations, prevent lubricant starvation and save lubricant
- Settings can be changed at any time
- System can be turned off for extended equipment shut downs
-
- Electromechanical, reusable drive unit with battery pack
- All around visible LED lights signal function and errors
- Reliable, precise lubricant discharge independent of temperature and counter pressure
- Short ROI through reduced follow-up costs
- Quick function control from a distance saves time and improves overall workflow
- Pressure build-up to 6 bar allows remote mounting with pipes up to 3 m
- Purge function
- Installation at safe and easy-to-access places reduces workplace accidents and saves time
- Reduces equipment downtime since the exchange can be carried out while the machines are running
- Lubrication point can be purged to clear blockages
Technical Information
| Drive | Electromechanical |
| Power Supply | Battery Pack |
| Housing | Transparent Plastic |
| Discharge Period | 1, 2, 3, … ,12 months |
| Lubricant Volume | 60cm3, 120 cm3, 250 cm3 |
| Operating Temperature | -10°C to +60°C |
| Pressure Build-Up | 6 Bar |
| Protection Class | IP 65 |
| Lubricants | Grease up to NLGI 2 / Oil |
| Max. Pipe Length | 3.00 m |
| CE | √ |
| UL | √ |
Tel: +27 12 547 1053 | Fax: +27 86 5011 728
251 Apaché Avenue | Cynthia Vale | Doornpoort | Pretoria | 0186